2005
Year
NORDIA
Builder
56' 7" (17.25m)
Length
3
Cabins

yatco anchor icon

CHARISMA - 2005 56' 7" NORDIA Nordia 55
Lymington
£425,000 GBP


The 2005 56' 7" NORDIA Nordia 55 Cruising Sailboat CHARISMA is a yacht for sale located in Lymington, United Kingdom . From 2005, of aluminium with dark blue hull livery, as only Holland’s Van Dam Nordia really could. She comes with a fully automated rig by Hall & Reckmann, and a moderate draft of only 2.4m. Down below there are two comfortable sleeping cabins, a lovely galley and main saloon, and an engine room with great access to all the major systems. In her first ownership, she spent the first few seasons of life in the Caribs, before shipping to the Solent in the UK where she has been used for relaxed, local family sailing ever since. Contact the yacht broker to receive more information or schedule a showing of this yacht for sale in today!

Get more information on this listing

LENGTH 56' 7" (17.25m)
BUILDER NORDIA
ASKING PRICE £425,000 GBP
BUILT (REFIT) 2005
BEAM 15' 5" (4.70m)
DRAFT N/A
MX SPEED N/A
CRUISING SPEED N/A
CABINS 3
GROSS TONNAGE 0.00
DISPLACEMENT 59500.56 Lbs
LOCATION Lymington, United Kingdom
Get more information on this listing

FULL SPECIFICATIONS

Construction

RCD Status: The yacht conforms with the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) and is categorized A – “Ocean”

 

Hull, Deck & Superstructure Construction:

  • The welding work is X-RAYED according to the rules of the Classification Societies.
  • Hull. 6mm Aluminium Alloy AL Mg 4.5 Mn (5083)
  • Deck. 5mm Aluminium Alloy AL Mg 4.5 Mn (5083). 50mm x 15mm teak planking.
  • Cockpit. 5mm Aluminium Alloy AL Mg 4.5 Mn (5083).
  • Cockpit floor and seats. 50mm x 15mm teak planking.
  • Cockpit table. Custom built in varnished teak.
  • Superstructure. 5mm Aluminium Alloy AL Mg 4.5 Mn (5083).
  • Hull fittings. Ball valves Lloyds approved.
  • Ballast. 8t. Lead integrated in air and watertight keel compartments.
  • Paintings and Coatings.
    1. Joinery: 2-component with satin-gloss finish.
    2. Exterior woodwork: 2-component with high-gloss finish.
    3. Hull inside: 2-component polyurethane coatings.
    4. Topsides, etc.: 2-component epoxy, finished with high-gloss polyurethane.
    5. Below waterline: 2-component epoxy-colturite; 2 coats of copper free antifouling.
  • 11 x Portlights. Lewmar opening portholes with insect screens.
  • 5 x Gebo Boomsma fixed superstructure windows.
  • 2 x Gebo Boomsma opening superstructure windows.
  • 4 x Gebo Boomsma accommodation hatches with ceiling integrated sliding insect screen & sunblind.

 

Keel & Rudder:

  • Keel Sole 20mm Aluminium Alloy AL Mg 4.5 Mn (5083).
  • Keel Sides 8mm Aluminium Alloy AL Mg 4.5 Mn (5083).

Machinery

Engine & Gearboxes:

  • 1 x 6 Cylinder diesel engine - Perkins Sabre M135, 99kw - 135hp; engine hours 723.8 @ June 2020.
  • 4 x Rubber design custom built vibration dampers.
  • Double flexible coupling between the gear box and propeller shaft.
  • Wet exhaust with a Halyard waterlock/silencer.
  • 1 Morse, single lever control.
  • Perkins Sabre engine controls- start/stop button; revolution counter; hour counter; gauges; warning lights and alarms for high coolant temperature and low oil pressure.
  • Fuel filter system. 1 x Separ switch-over duplex filter-water separators; 1 x De-bug filter.

 

Propulsion & Steering:

  • 1 x Fixed 3 bladed skew-back Nibral propeller.
  • 1 x Closed oil-bath shaft system with self-centring radial bearing and axial thrust bearing.
  • Custom made wire steering system.
  • Wheel disengagement unit.
  • Steering wheel brake.
  • Rheinstrom Electric bowthruster. 9kW/12hp.

Electrical Systems

Voltage Systems:

  • Double-wire-insulated 24V-DC and 230V-AC system.
  • Materials are approved for sea going ship use. 24V and 230V wires mounted in individual cable tracks.
  • Siemens automatic double pole circuit-breakers.

 

Battery Banks:

  • Mastervolt maintenance free gel batteries.
  • 1 x Service set 24V – 600A.
  • 1 x Start set 24V – 200A.

 

Battery Chargers:

  • Mastervolt bipolar alternator 24V – 75A.
  • Mastervolt battery chargers 24V -100A.

 

Alternators:

  • 1 x Perkins bipolar alternator 24V – 55A.

 

Generator:

  • 1 x Onan MDKAV generator set 230V – 13,5kW (Above standard).
  • Generator Hours: 735.5 at 12/06/19.

Plumbing Systems

Fresh Water & Water Heating System:

  • Gianneschi & Ramacciotti water pressure system.
  • Rheinstrom 75L. boiler, heated by heat-exchange with the main engine intercooling system and by means of 230V.

 

Bilge Pumps:

  • 2 x Niro Petersen marina discharge connections.
  • 1 x Rheinstrom manual bilge pump.

 

Grey & Black Water:

  • 1 x Rheinstrom black water discharge pump.
  • 1 x Rheinstrom electric bilge pump/grey water discharge pump.

Tankage

  • 2 x Vetus tank level sensors on fuel and water tanks with calibrated analogue read-out.

 

Fuel:

  • Holds 262 Imp. Gallons. (1191 litres)
  • 1 x Blackmer hand operated rotating pump to remove dirt from the fuel tank sumps.
  • 2 x calibrated dip sticks.

 

Fresh water:

  • Holds 328 Imp. Gallons. (1491 litres)

 

Grey/Blackwater holding tanks:

  • Wastewater tank holds 33 Imp. Gallons.
  • Blackwater tank holds 22 Imp. Gallons.
  • 2 x High alarm sensors on the grey and black water tanks.

Navigation Equipment

In cockpit:

  • 1 x Suunto, integrated in Whitlock Premiere pedestral.
  • Autopilot. 1 x Raymarine ST7001 with Whitlock ¼ HP drive unit.
  • Echo sounder. 1 x Raymarine ST60.
  • Log/Speed. 1 x Raymarine ST60.
  • 1 x ST60 Wind system, complete with wind transducer.
  • 1 x ST60 Raymarine ST60 Close hauled/VMG instrument.
  • GPS. 1 x Furuno GP-32, interfaced with Autopilot and Radar.
  • Radar/Chartplotter. 1 x Furuno Navnet 1834C colour display.
  • 1 x Furuno Navtex NX-300
  • Repeater. 1 x Raymarine ST60 multi function display.

 

Communications Equipment:

  • 1 x VHF Telephone. Furuno FM-2721.

Domestic Equipment

Galley:

  • 1 x Siemens ceramic and electrical oven.
  • 1 x Custom integrated 24V extractor hood.
  • 1 x Refrigerator. Frigoboat 125 L.
  • 1 x Freezer. Custom built 100L., with stainless steel lined interior. Dual thermostat can also be used as refrigerator.
  • 1 x Siemens washer/dryer combination.
  • 1 x Twin stainless steel kitchen sink.
  • 1 x Grohe hot/cold kitchen faucet.
  • Custom made Perspex holders to fit crockery.
  • Custom made velvet holders to fit cutlery.

 

Heads/Showers:

  • 2 x Rheinstrom manual operated toilets.
  • 2 x Alape oval shape wash bacins.
  • 1 x Grohe hot/cold mix faucets.
  • Deck Shower. Hot/cold near the transom platform.
  • 2 x Grohe hot/cold shower mix faucets.
  • Shower floors. Teak grating.

 

Heating & Ventilation:

  • Eberspacher D5LC central heating system.
  • 1 x Electric engine room ventilator
  • 6 x stainless steel dorades.
  • Air conditioning. 1 x Clima system with central compressor and fancoils per cabin.

 

Entertainment:

  • 1 x Kenwood Car radio/CD player.
  • 1 x Samsung LCD TV 38cm.

 

Lighting:

  • Aqua signal 1 x set of navigation lights PS-STB-STERN-STEAM-TOP LIGHT; 1 x 3-colour masthead light; 2 x spreader lights; 2 x cockpit lights.

Accommodation

  • Cherry joinery and dark blue upholstery.
  • Interior hardware. Gold plated (Edelmessing maintenance free.)
  • Kitchen dress top. Granite Labrador light.

 

CHARISMA has a large forward lazarette. This is separated from the main accommodation by a crash bulkhead.   After of this is a generous heads compartment with shower that is used by the 2 upper and lower guest cabins behind it. These port and starboard cabins each have access to this.

 

Both of these access the main saloon via lovely curved doors into a small lobby with a step up. To port is a U-shaped dining area with a cherry table with marquetry. The floors have teak and holly soles throughout. To starboard is a large and navigation station which can also be used as an office.

 

Aft of this is access to the centre cockpit and to port further aft is a large linear galley with large refrigeration and storage, a gimballed electric cooker and hob and washing machine. To port is the entrance to a large, well-maintained engine room.

 

The owners’ stateroom is aft of the galley and there is a large centerline double berth with lee cloths, seating and huge amounts of storage. There is also an en-suite heads compartment with shower.

Deck Equipment

Rig:

  • Mast and boom. 1 x HallSpars, aluminium alloy.
  • Reefing. 2 x Reckmann hydraulic in mast furling system.
  • Boomvang. 1 x Hallspars mechanical.
  • Spinnakerpole. 1 x Hallspars, aluminium.
  • Standing rigging. Stainless steel 1x19 wire 12mm. Head and cutter stay rod.
  • Mast and boom. 1 x HallSpars, aluminium alloy.
  • Reefing. 2 x Reckmann hydraulic in mast furling system.
  • Boomvang. 1 x Hallspars mechanical.
  • Spinnakerpole. 1 x Hallspars, aluminium.
  • Standing rigging. Stainless steel 1x19 wire 12mm. Head and cutter stay rod.
  • Genoa furl. 1 x Reckmann hydraulic furl.
  • Backstay tension. 1 x Barbarossa mechanical.
  • Halyards and sheets. Marlow.
  • Tracks and hardware. Lewmar Synchro sz 3.
  • Hydraulic power pack. 1 x Lewmar Hydraulic Commander, with 5 operating functions.

 

Winches:

  • Sheet winches. 2 x Lewmar 64 CHST hydraulic Genoa winches; 1 x Lewmar 44 CST main sheet winch. 2 x Lewmar 48 CST staysail sheet winches.
  • Halyard winches. 2 x Lewmar 44 CST hand winches; 1 x Anderson spinnaker line driver.

 

Sails:

  • Hood woven polyester.
  • 1 x Furling main sail.
  • 1 x Furling Genoa
  • 1 x MP-Spinnaker with squeezer.

 

General:

  • 1 x Boathook.
  • 1 x Scrubber.
  • 1 x Emergency tiller.
  • 1 x Flag with pole with flag.
  • 1 x Fog horn. Air compressor foghorn mounted on mast.
  • Guard rail. 20 x Stanchions, custom built of high gloss polished stainless steel tube, 70 cm (28”) high. Pull and pushpit, custom made of high gloss polished stainless steel tube.
  • 2 x Teak covered seats in pushpit.

 

Anchoring & Mooring Equipment:

  • 2 x Chain roll fitting each with a large nylon roll welded in the stern construction.
  • 1 x Lewmar 3000 electrical driven chainwheel-capstanhead anchor windlass.
  • 2 x CQR Anchors each 75 lbs.
  • 1 x chain of 80 m – 10 mm.
  • 1 x Nylon warp of 80 m – 18mm.
  • 6 x Mooring cleats, aluminium.
  • 6 Mooring line fairleads.
  • 4 Deltaflex mooring lines 18mm, each 20m.
  • 4 x Fenders 300mm x 800mm.

 

Tender & Outboard:

  • AB RIB 2019 and Tohatsu 9.8hp 2 stroke outboard.

 

Safety Equipment:

  • 2 x Secumar life buoys.

 

Fire-fighting equipment:

  • 1 x Fire fighting system of CO2 extinguishers, remote operated from outside the engine room.
  • 4 x Fire extinguishers elsewhere.

Listing Marketed by

Sue Grant
Berthon International
The ShipyardLymington, United Kingdom

More information or schedule a showing

Share With Your Friends

NORDIA 2005

Call Broker

Sue Grant
Berthon International