1947
Year
ATKINS
Builder
34' 6" (10.52m)
Length
0
Cabins

yatco anchor icon

Altair
1947 34' 6" ATKINS Classic Yacht Cutter Wilmington California United States
$14,500 USD


The 1947 34' 6" ATKINS Cutter Cutter Classic Yacht Altair is a sail boat for sale located in Wilmington, California, United States.

 

 This William Atkin designed classic was built at the Seimans Boat Yard, Gresham, Oregon. She is a one-off design, in size midway between the familiar 32' Eric and 26' Eric Jr,  Colin Archer style, Atkin designs, with a layout identical to that of the smaller Eric Jr. 

There was an expert shipwright conducted restoration of 80% of the vessel completed three years ago. Receipts and photos are available to serious buyers. Some further restoration has recently been found to be required, please call or email for more detailed information. 

The two boat owner reduced the price April 27th 2021 to expedite the sale.   Contact the yacht broker to receive more information or schedule a showing of this 1947 34' 6" ATKINS Cutter Classic Yacht Cutter Altair yacht for sale in Wilmington, California, USA today!

Get more information on this listing

LENGTH 34' 6" (10.52m)
BUILDER ATKINS
ASKING PRICE $14,500 USD
BUILT 1947
BEAM 9' 6" (2.90m)
DRAFT N/A
MX SPEED N/A
CRUISING SPEED N/A
CABINS N/A
GROSS TONNAGE 0.00
DISPLACEMENT 15,500 Lbs
LOCATION Wilmington, California, USA
Get more information on this listing

FULL SPECIFICATIONS

Description

 

 This William Atkin designed classic was built at the Seimans Boat Yard, Gresham, Oregon. She is a one-off design, in size midway between the familiar 32' Eric and 26' Eric Jr,  Colin Archer style, Atkin designs, with a layout identical to that of the smaller Eric Jr. 

There was an expert shipwright conducted restoration of 80% of the vessel completed three years ago. Receipts and photos are available to serious buyers. Some further restoration has recently been found to be required, please call or email for more detailed information. 

The two boat owner reduced the price April 27th 2021 to expedite sale.  

Overview

 

Construction

Carvel planking on frame, heavy scantlings.

Planking of 4'' x 1" Port Orford Cedar, fastened with bronze screws to 1 1/2" x 1 1/2" bent oak Frames on 6" centers, kerfed and backed with sawn oak in turn of bilge. Floors are 2" oak. Stem/Deadwood/Sternpost of 8" teak. Keel is lead on 10" iron bark. Clamps/Shelf are 2'' x 5" Port Orford Cedar. Stringers are 1 1/2" x 5"  Port Orford Cedar. Rudder is Port Orford cedar with bronze pintles and gudgeons. Decks are 3/4" x 5" laid caulked teak over 1/2" birch Finnish plywood. Beams : 2 1/2" x 2" sawn oak (deck) and 1/2" x 2" sawn oak (cabin top). The cabin is solid 1" Port Orford cedar. Cabin top is 1/2" marine ply with FRP over. Cabinetry is mahogany marine plywood and Port Orford Cedar. Rig is solid one piece spruce spars, with SS pressed 7x19 standing rig.


Accommodations

Accommodations for two, with basic conveniences of sink, kerosene stove and ice box. There is an electric toilet that needs to be plumbed in.


Engine

The Yanmar QM15 2 cyl raw water cooled diesel was produced sometime in the mid-late eighties and reconditioned in the general refit in 2014, at which time the engine was installed.


Sails and Rig

Standing rigging and running rigging were new in 2018. All existing sails are mounted on the boat - mainsail, staysail and jib ... age of the sails is unknown but they are in good condition. Running backstays, hyfield lever for fore stay, 2 cockpit winches.


Ground Tackle

  •     30# CQR plow anchor w/100" chain and 150' rode
  •     manual windlass


Additional Information

  •     Altair was purchased by her current owner in 2012, with the engine on a pallet. At Wayne Ettel's yard the hull, frame replacement and horn timber work was conducted in 2013. The engine was installed with new SS mount, shaft, prop and shaft log in 2014. The mast, boom, restored custom bronze mast ring installation, cabin sides and top restored in 2015.
  •     frames aft of companionway on both sides , horn timber and 2 1/2 planks replaced by Wayne Ettels 2013/2014
  •     NEW SS engine mount, shaft, prop and shaft log
  •     NEW fuel lines and filters, control cables and Spinlock single control lever
  •     new wet exhaust
  •     last bottom paint 2017
  •     decks need refastening. Owner has all the required bronze screws
  •     new topside paint
  •     oar locks available for sculling oar
  •     mainsail cover
  •     NEW cockpit cushions
  •     full boat cover

Listing Marketed by

Helen Kaz
The Shoreline Yacht Group
210 Whalers Walk Suite 123 San Pedro, California, 90731 USA

I'm interested in Altair

Share With Your Friends

ATKINS 1947

Call Broker

Helen Kaz
The Shoreline Yacht Group