Blues
2010 99' 4" SOUTHERN WIND SHIPYARDS Performance Sailboat SW100 RS Palma de Mallorca Spain

($5,351,887 USD est.) €4,400,000 EUR

0. HULL & APPENDAGES

0. Construction

   The hull is built on a female mould, using infusion technology, with SP SYSTEM epoxy resin.
   Outer skin is glass & Kevlar, inner skin is carbon and core is Corecell, vacuum bagged to obtain maximum bonding. The hull is reinforced with prefabricated structural floors, stringers and longitudinals
   Bulkheads are glass or carbon fibre sandwich construction
   Hull windows – four on each side, in saloon and guest cabins

   Hull Finish

   Hull was repainted in Flag Blue Awlgrip in 2018
   White cove and double boot stripes, repainted in 2018 Black antifouling applied in June 2020

   Max Power R321/4 32.5 hp bow thruster, hydraulically driven by PTO Thruster demounted and fully serviced in 2018

   Keel

   The fixed T-bulb keel is comprised of steel fin and antimony hardened lead torpedo bulb Steel fin keel (2,300kg) and torpedo bulb (20,150 kg)

   HULL & APPENDAGES

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|2

SW100#11

Rudder

The spade rudder by Isotop is constructed from pre-preg carbon fibre with closed cell polyurethane foam core. Pre-preg carbon fibre rudder stock, mounted on two self-aligning bearings from Solimar. Bearings replaced in 2017

Steering Systems

Twin composite steering pedestals fitted in cockpit with roller bearings and flush mounted consoles, accommodating steering compasses and other instruments
Twin Solimar carbon fibre wheels, 1200mm diameter
Chain and sprocket steering system connected to lightweight alloy quadrant

Simrad Autopilot with single piston

Transom

Hydraulic folding swim platform, 2x pistons Hot/cold shower and storage lockers

DECK

Deck Construction

The deck is built on a female mould, using infusion technology, with SP SYSTEM epoxy resin.
Both inner and outer skins are carbon fibre and core is Klegcell, vacuum bagged to obtain maximum bonding. Pilot house superstructure is also constructed in carbon fibre laminate

Deck Finish

Deck is painted in white Awlgrip
Teak laid on side and aft decks, foredeck, coachroof, cockpit floors and seats with black caulking

Deck Lockers

Anchor locker with access to chain storage, repainted in 2019
Forepeak locker with storage for sails, rigging and equipment, repainted in 2020 Lazarette locker aft, repainted in 2020
Life raft lockers on either side of cockpit

Deck Equipment

Centre cockpit table, finished in teak with folding leaves and integrated refrigerator Stainless steel pulpit, pushpit, stanchions and side opening gates
Aluminium ladder with fixing points on side gate
Stainless steel swimming ladder with fixing points on transom platform

Hatches & Windows

Flush mounted composite deck hatches from Solimar, supported by double gas rams
Oceanair mosquito screens and blinds on all hatches
Sliding polycarbonate companionway hatches and washboards. Main companionway washboard electric dropdown

Winches by Harken

Primaries: Secondaries: Mainsheet: Traveller: Halyard :

Pit:
Aluminium Sanguinetti retractable mooring winch on foredeck

Sailing Hardware

Ronstan deck hardware

2 x 1120 STA 3-speed hydraulic 2 x 1120 STA 3-speed hydraulic 1x 1120 STA 3-speed hydraulic 1x 70 STA 2-speed hydraulic

2 x 980 STA 3-speed hydraulic

2x 980 STA 2-speed manual

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|3

SW100#11

Spinlock jammers and clutches Antal winch buttons

Deck Arrangement

Anchoring & Mooring

Main anchor Ultra stainless steel 225lb with 140m of 14mm chain
Spare anchor 37Kg Fortress FX 125 with 20m of chain and 100m rode, mounted in forepeak Hydraulic retractable aluminium anchor arm, folds away flush inside the anchor locker Maxwell 4500 model hydraulic anchor windlass
Ten (10) custom retractable cleats (1x bow, 2x stern 2x midships) (All serviced in 2018) Fenders and mooring lines

Deck Canvas (all dark blue)

2x Folding sprayhoods
Sun awning connecting to boom
Bimini over center cockpit and sun lounge area with side and rear curtains in clear plastic Mainsail cover
1x sets of winch covers
Steering pedestal and wheel covers
Cockpit table covers
Cockpit cushions with back rests
Blue Sunbrella covers for cockpit cushions

INTERIOR

General

Interior furniture is made to the highest marine standards, using teak and, where possible, sandwich construction with closed-cell PVC or resin-sealed paper honeycomb core, to reduce weight.
Inside of lockers is finished in cedar veneer where possible
Removable sandwich construction floorboards are finished in satin varnished teak

Removable overhead panels are covered in Ledertex Nerini material. Additional side panelling in white vinyl upholstery

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|4

SW100#11

Flush mounted overhead LED lighting throughout
Saloon upholstery in white linen with grey cotton crew covers Corian countertops in heads and galley

Forward Cabin (Master)

Double berth with nightstands and reading lights on either side aft and storage drawers beneath Dressing area aft to starboard with cedar lined drawers and lockers
Two-person settee to starboard with hull window outboard
To port, a hanging locker aft with shoe storage and hull window.

Vanity desk with removable seat and retractable television forward to port
En suite head with Tecma WC & bidet, separate shower compartment, double wash basins, mirrors and storage lockers

Forward Guest Cabin

Double berth to port with bookshelves, lockers and hull window outboard
Hanging locker and storage lockers forward to port
En suite head with Tecma WC, separate shower compartment, wash basin, mirrors and storage lockers

Studio Lounge

In the forward starboard section of the saloon, adjacent to the forward guest cabin, a convenient studio and lounge area is located with writing desk and bar with double wine cooler. Hull window located outboard of writing desk and bookshelf above.

Interior Arrangement

Saloon

Eight-person teak finished dining table to port with storage lockers for tableware aft To port, a comfortable seating area with large settee, two seats and a coffee table Samsung 40” LCD television mounted on aft bulkhead
Hull windows on either side outboard

Aft Cabin (Port)

Twin single berths on either side with storage lockers and bookshelves above
Nightstand with drawers between the berths, hanging locker forward and outboard
En suite head with Tecma WC, separate shower compartment, wash basin, mirrors and storage lockers

Aft Cabin (Starboard)

Double berth outboard with storage lockers and bookshelves above
Nightstand with drawers inboard of berth, hanging locker forward and outboard
En suite head with Tecma WC, separate shower compartment, wash basin, mirrors and storage lockers

Galley

Open plan galley design with central island that doubles as work surface or dining table with removable stools
Work surfaces finished in black Corian
Double stainless-steel sinks, storage lockers and drawers for galley equipment

Galley finish is generally white painted with teak veneer cabin sole

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|5

SW100#11

Galley Equipment

Front loading column refrigerator, 570 litres
Front loading freezer, 305 litres
One top-loading freezer below cabin sole in galley, 105 litres
U-line ice maker
Miele 4 gas burners + 2 electric hob cooker combination
Smeg 70 cm wide oven both oven and stove mounted on a custom-made gimballing system. Smeg microwave oven
Alpes extractor galley extractor / hood above the cooker
Mixer faucet for hot and cold water
Miele washing machine
Miele dryer
Miele Dishwasher

Nav Station

Forward facing navigation desk with opening top nav table Flush mounted instruments and displays on carbon Storage lockers drawer and shelf for nav aids

Engine Room

Insulated with sound and vibration dampening materials Fire protection to A60 rating
Extraction and ventilation fans
Dual access in saloon

ENGINE & SYSTEMS

Main engine is a Cummins QSB 5.9 MCD 305 hp@2.600 rpm [Approx 6,000 hours in October 2020]
ZF 301A reduction and reversing gear with 70mm shaft and four-blade folding Brunton Varifold propeller Electronic ZF throttle controls on both steering pedestals
Shaft pulled in 2018, 5,000-hour major service in 2019 plus 10-year RINA survey in 2020.

Max Power R321/4 32.5 hp bow thruster, hydraulically driven by PTO

Fuel System

Two integrated composite fuel tanks with total capacity of 4,200 litres San Giorgio Sein level monitoring system
One stainless steel day tank with 170 litres capacity
G&R 24v transfer pump, plus manual backup pump, both with filter

Plumbing Systems

Pressurized hot/cold freshwater system
Two integrated composite water tanks with 2000 litres capacity Two G&R Eco jet freshwater pump, 1x 24v, 1x 220v
Two 80-liter hot water heaters
220V HEM heavy duty water maker, producing 250 litres per hour. One G&R seawater pump for deck wash and firefighting 24v Cathelco active cathodic protection for main sea water manifold

Ventilation System

Frigomar Air Conditioning with 96,000 total BTU (2 Compressors one new and one rebuilt 2019) Fan coils and controls in all cabins, saloon and galley

Refrigeration Systems
4x Frigomar refrigeration compressors, can be operated on 24vDC or 220vAC (fridges new 2018, freezers upgrade & new 2020)

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|6

SW100#11

U-line icemaker

Drainage System

All marine WC by Tecma, can be operated on fresh or seawater system Two composite blackwater tanks, total capacity 720 litres
G&R macerator pumps connected to each black water tank
50mm deck waste pump out fittings, one for each tank

Six individual bilge areas may be pumped out via manifold
1x G&R 24v pumps and one Whale Gusher manual pump connected to manifold Two pumps permanently connected to main bilge and engine room bilge Yanmar diesel crash pump for firefighting or emergency bilge draining

Hydraulic Systems

Powered hydraulic system is supplied by Max Power power-pack with two 13 kW DC electrical motors or Power Take Off pumps on both generators.

Powered hydraulic functions:

• Winches (8)

• Head sail furlers (2)

• Windlass (1)

• Mooring winch (1)

• Transom door (1)

• Anchor Arm (1)

  Bamar hydraulic system: powered by manual pump or dedicated power pack
  Hydraulic functions: Backstay, Vang, Outhaul, Inner forestay, jib halyard tensioner, Staysail halyard tensioner. (Serviced 2019)

  ELECTRICAL SYSTEM

  General

  Electric system is installed in conduits, alongside the hull, with junction boxes provided and secondary distribution panels. Wiring numbered on both ends and laid down to be accessible for checking and servicing.

  DC System

  Service Batteries: two (2) battery packs, each made of Sonnenschein Dry Fit units 24 volt - 1000 Ah each, for a total of 2000 Ah 24V (New 2016)

  Navigation Batteries: One (1) battery pack, with two (2) batteries Excide, 160Ah 12V connected in series [New 2019]

  Engine & Genset start: one (1) battery pack, with two (2) batteries Sonnenschein Dry Fit, 160 Ah 12 volts connected in series. [New 2017]

  Emergency batteries: Sonnenschein Dry Fit, 200 Ah

  AC System

  Shore power system – 1x watertight sockets in lazarette with 1x 25m shore power cables

  Both generators newly installed in 2018
  Port Genset - Onan 19 kw 50 Hz with PTO, mounted into a sound insulation box 700hrs in Oct 2020 Starboard Genset - Onan 19 kw 50 Hz with PTO, mounted into a sound insulation box 700hrs in Oct 2020

  Chargers/Inverters

  Victron 100-amp battery charger for service batteries

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|7

SW100#11

Victron 50-amp charger for navigation batteries
Three (3) Victron Combi chargers/inverters 70-amp 24v/2500W (new 2019) 190A Service Alternator on main engine
Engine and genset batteries charged via dedicated alternators on each engine

ELECTRONIC SYSTEMS

Navigation Instruments

B&G H5000 (new 2015) with performance processor, gyrocompass, mast head unit (wind speed/direction, speed sensor, heel sensor and 2x depth sensors (one forward, one aft)
3x 40/40 on carbon bracket below gooseneck
2x 20/20 on deck

2x GFD on deck
1x Analogue wind direction on deck 1x GFD in captain cab
2x GFD at nav station
1x GFD in master cabin

Furuno NavNet chart plotter black box system integrates with MaxSea, displays at nav station and at helm NavNet/Computer screens on both pedestals with roller ball control (new 2018)
Radar: Furuno 36 nm Navnet 3D digital scanner, radome on front of mast
GPS: Simrad MX612

Autopilot: SIMRAD AC20; 2 displays AP24. – one cylinder

Computer Systems

Two computers, (Navigation new 2020 + Communication) linked to monitors at nav station Printer/scanner
Wireless keyboard and mouse
Max Sea Time Zero software

Communications Systems

AIS Rx and TX SIMRAD A150
Icom IC 603 VHF with handsets at helm and nav station KVH Mini V-Sat
INMARSAT Standard-C

ICOM M801E SSB Inmarsat Standard C WIFI & 4G router

Entertainment Systems

Saloon - Samsung 40” LCD television, NAD hi-fi amplifier with surround sound, Sony Blu-ray DVD player

Master Cabin: 26” Samsung LCD television with Onkyo compact A/V system Guest Cabins: Onkyo compact audio system with speakers in deck head Crew Area: Onkyo compact audio system with speakers in deck head
Deck: Cockpit speakers in both cockpits, connected to saloon hi-fi

MAST & RIGGING

Mast: Southern Spars - Carbon Fiber High Modulus – 3-spreader
Boom: Southern Spars – Park avenue - Carbon Fiber
ECSix continuous side rigging, ECSix torsion head stay and inner forestay ECsix single backstay and running backstays
Genoa furler, Bamar flush hydraulic with carbon foil

Tel. +39 010 570 4035 | | sws-yachts.com | sales@sws-yachts.eu

|8

SW100#11

Stay furler Bamar flush hydraulic with carbon foil
Removable mast jack with manual pump
Upward lights on each spreader, downward lights on lower spreader
Bamar hydraulic cylinders with electric and manual pump controlling backstay, vang, outhaul, inner forestay adjuster and genoa halyard. All hydraulic cylinders serviced in 2018-2019
Extensive running rigging inventory available on request

Dimensions:
I: 36.300 m.
P: 35.470 m.
J: 10.700 m.
E: 12.230 m.
Sail area (with 106% genoa) 463 sqm

Mast Antennas

VHF/DSC masthead
Navtex
Fleet Broad Band 250 on lower port spreader KVH V-sat on lower stbd spreader
Furuno radar antenna on front of mast

EQUIPMENT

General Equipment

5.2m rigid inflatable tender with stainless and teak chocks for foredeck
70Hp outboard motor
Manually retracting custom carbon passarelle (retractable into a dedicated storage locker) Two small mechanical safeboxes

Safety Equipment

Jon Buoy
3x 6-person life rafts Fire extinguishers EPIRB
Life jackets

SAILS