SPECIFICATIONS
Construction:
Built in 2005 by Wally Europe in Fano, Italy, with exterior and interior design by Luca Bassani, her fortitude is augmented through effortless operation, featuring an in-furling boom and a self-tacking, furling jib. This yacht boasts a sleek profile with flush decks, where all main halyards and sheets are neatly concealed beneath the deck, ensuring both a clean aesthetic and efficient functionality.
Accommodation:
Sleeps 6 in 3 cabins + 3 heads. The master cabin is equipped with two queen-sized beds, an office, and an en-suite bathroom. The second guest cabin has two twin beds and an en-suite. The third cabin has a Pullman bed and an en-suite bathroom.
Machinery:
- 250HP Cummins diesel engine [new 2024]
- Engine hours: 0 hrs
- Cummins Onan 22.5 KV generator [new 2024]
- Maximum Speed: 12 kts
- Fuel Tanks: 1,800 Ltrs in a carbon tank
- Water Tanks: 1,200 Ltrs in a carbon tank
Spars and Rigging:
- In-furling boom Carbon Fibre
- 4 Lewmar 111
Sails:
- One Sails Mainsail [2016]
- One Sails Genoa [2016]
- One Sails furling Gennaker [2016]
- Wally 94 INTI cube
- North Sails Genoa [2015]
- Trysail
- Storm Jib
Navigation:
- Raymarine AIS 50
- 2 x fixed VHF
- Satel
- 2 x MX GPS receivers
- 3 x Raymarine hybrid touch Chartplotter
- Navtex
- Standard C
- B and G Hercules 3000: 7 x FFD
- 8 x Analogues, 4 x 20/20
- 1 x Autopilot
Domestic Equipment:
- 200Ltrs Gianneschi boiler
- Gianneschi Hot water circulation
- Condaria air conditioning [new 2012]
- Tecnicomar watermaker
- Frigomar fridge-freezer [3 x units in the galley]
- Frigomar drinks fridge
- Techimpex oven [2016]
- Siemens microwave
- Sonos HI-FI
- Washer machine Samsung [2016]
- Dishwasher Bosch [2017]
Tender:
- 3.6M Zodiac Tender complete with a 15 Yamaha Outboard
Construction work 23/24
- Five-year overhaul of rigging, change of fittings of pockets and spreaders, combo of high and lower stays
- Replacement of bow pulpits
- Revision of tonnages plus adding of relaix
- Replacement of fridge pumps
- Furling overhaul
- Vang review
- Oil-dynamic refurbishment pedestal
- Hydraulic emergency stop button
- New external mattresses plus cockpit
- New dodger
- Inspection of black water tanks, washing and replacement of fittings
- Replacement of WC macerators
- Replacement of sea catch baskets
- Replacement of 7 sea caps
- New engine
- Complete generator overhaul
- Complete inverter overhaul
- New propeller axis
- Engine room painting
- Replacement of Tubomagic trim
- Replacement of the diesel transfer pump
- Overhaul of all pumps
- Overhaul of bilge pumps
- Fire pump overhaul
- Autoclave overhaul
- Daily tank disassembly, cleaning, fitting change
- New control unit, diaphragm holder, watermaking diaphragm
- New Catelcos
- New bathroom extraction blower for left bank
- New inverter compartment insulation
- Update cabin extinguishers (new)
- Replacement of condensate drain hoses for Frifo Funcoil
Site works 21/22
- Restoration of bathroom extraction pipes on right/left walls
- Change oven/hob Techimpex
- New blast chiller
- New refrigerator sensors plus fridge/freezer doors
- Sanisplit replacement
- Repainting lazzaretto
- Tuga glass rubbering
- Renovation in the worn points
- Chain change
- Barbotin review
- Tightening of electrical panels for RINA class
- Replacement of the 380 V dock transformer
- New washer/dryer
- New horn
- New oil-dynamic cooling exchanger
- Replacement of 3 hydraulic PLC cards
- Overhaul of the bow sheet piston
- Revision of the jib halyard piston
- New watermaking low pressure pump
- New A/C sea pump
Site works 19/20
- Replacement of on-board instruments and rewiring
- AIS and radar replacement
- Replacement of on-board computer
- Repainting/lamination of bubble on the left bow
- Reconsolidation of the knee of the extreme bow valve
- Lamination/painting gelcoat tender hull
- Boom light replacements
- Lopolight navigation replacement
- Construction of stern turrets (references) for maneuvering
- External display door construction
- Replacement of the mainsail
- Overhaul of engine room pumps
- Painting of woods
- Replacement of watermain membranes
- Painting sail lock
- Engine/generator override activation
- Painting of transom
- Removal of the rudder
- Revision of rudder bushings (high and low)
- New base sail
- New staysay
- New staysay sheets
- New blocks/equipelight
- Repainting of bottle protections/cable glands
- PTO clutch bearings
- Replacement of PTO connectors (Centaflex)
- Backstay pistons review
Site works 18/19
- Repainting of walls
- Teak finishing
- Replacement of damaged slats
- Cockpit/cockpit tires
- Replaced Tesa base slides
- Toggle Poistone staysay
- Staysay
- Steering wheels
- 2x Gennaker halyard pulleys
- Left jib halyard pulley
- Mainship pulley
- Jib sheet pulley
- Main halyard
- Jib halyard on piston
- Amantiglio
- New scores
- New textile brakes
- Diesel tank cleaning inspection
- Dinette fridge for inspection/insulation/condensate collection
- Revision 7 A/C funcoil
- New air delivery hoses
- Slider
- Air filters
- Manifold baser shaft
- Magic trim review
- Revision of the staysay piston
- Sheet piston overhaul
- Revision of the jib halyard piston
- Tesabase review
- Wind station connectors
- New batteries services/lights/electronics
- Overhaul of A/C pumps, autoclave, low pressure watermaker, refrigerator pumps, oil cooling
- Replacement of black water pipes
Site works 17/18
- Renovation of teak deck
- Complete painting of hull boom mast
- Construction of new guest cabin
- Complete engine overhaul
- Complete generator overhaul
- Complete A/C overhaul
- Engine room painting
- New fridge system
- Pumps overhaul
- Engine room recabling
- Replacement of engine room pipes
- PTO replacement
- New muffler separator
- New Sat Tel
- New TV antenna
- New touch screen crew
- New service inverter/fridge
- Painting paioli
