1983
Year
SHANNON
Builder
32' (9.75m)
Length
1
Cabins

yatco anchor icon

SKÅL - 1983 32' SHANNON 28
Southwest Harbor Maine
$68,000 USD


The 1983 32' SHANNON 28 Cruising Sailboat SKÅL is a yacht for sale located in Southwest Harbor, Maine, USA.  ** NEW TO THE MARKET ** The seller is a fastidious former USAF pilot - and is currently a two-boat owner! ** Extensive refittingCutter rigPort Townsend sailsLow hours on Yanmar dieselStored inside in winter (Oct - June)Radar; windvaneMuch more  (see Full Specifications)____________________________________________________________________________Since 1975, Shannon Yachts in Bristol, RI - and its founder Walter Schulz - have earned an international reputation for quality construction and offshore integrity. Shannons have logged over a million bluewater miles, including an impressive list of circumnavigations and many transoceanic passages.  Almost every major harbor in the world has been visited by a Shannon.   Shannon is a featured builder (alongside Morris, Hinckley, Pacific Seacraft, etc) in Ferenc Mate's famous book, The World's Best Sailboats.The Shannon 28 is an exceptionally strong well finished cruising yacht. Her classic lines and modern cruising hull shape assure safety and comfort offshore and admiration at anchor.With her fastidious care and constant "no-expense-spared" upgrading, SKÅL is truly a unique ocean-going vessel in this class - and is likely the best equipped Shannon 28s on the market.** Seller offers complimentary ground transportation for viewings  -from Bar Harbor or Bangor airports ** Contact the yacht broker to receive more information or schedule a showing of this yacht for sale in today!

Get more information on this listing

LENGTH 32' (9.75m)
BUILDER SHANNON
ASKING PRICE $68,000 USD
BUILT (REFIT) 1983
BEAM 9' 6" (2.90m)
DRAFT N/A
MX SPEED N/A
CRUISING SPEED N/A
CABINS 1
GROSS TONNAGE 0.00
DISPLACEMENT 9300 Lbs
LOCATION Southwest Harbor, Maine, USA
Get more information on this listing

FULL SPECIFICATIONS

Overview

 

**NEW TO THE MARKET - ADDITIONAL DETAILS AND PHOTOS TO BE POSTED SOON**


HIGHLIGHTS
  • Renowned Shannon quality
  • Extensive refit by Morris Yachts in 2010 (details below)
  • Additional continual upgrading and refitting (details below)
  • Cutter rig; recent Port Townsend sails
  • Bronze hardware; Beautiful teak!
  • Simrad radar and charplotter; Monitor windvane
  • Much more!

OWNER'S COMMENTS

I chose the Shannon 28 because I required an exceptionally strong well-finished cruising yacht. The classic lines and modern cruising hull shape assure safety and comfort offshore and admiration at anchor.

“Skål” underwent an extensive re-fitting at Morris Yachts in Southwest Harbor Maine in 2010 and has been continuously upgraded every year since. I've solo-sailed her along the more remote regions of Down-East Maine and Nova Scotia and have always ensured this proper yacht was ready for sea - and the weather often found in that region. “Skål” has been professionally maintained annually and stored inside in heated storage during the ten years of my ownership.

“Skål” is truly a unique ocean-going vessel for her size and likely the best equipped Shannon 28's on the market. An admiring world voyager commented when seeing her on a recent cruise that, “she’s a 28 ft. boat that doesn’t know she’s a 28 ft. boat!”


2010 REFIT at MORRIS YACHTS (approx $65,000!)
  • Teak and holly cabin sole replaced and varnished
  • Interior cushions replaced - and Sunbrella upholstery fabric throughout
  • Trident Marine propane control and detection system added
  • Xintex M-2A propane monitor added
  • Mast mounted radar reflector added
  • Attwood sump pump installed - for shower pan and icebox drains
  • Water supply lines replaced
  • Raw water strainer added in starboard lazarette
  • Aluminum tank fuel tank installed - athwartship in port lazarette
  • Rigid holding tank installed; plumbing replaced
  • Harken mainsheet traveler installed on bridge deck
  • Running rigging replaced
  • Hull stripped, soda blasted, and barrier coated
  • Selected stringers reinforced
  • Cockpit coaming caps replaced
  • Repairs to toerail
  • Exterior teak stripped; Cetol applied
Simrad Electronics (more details in Electronics section below):

  • RD68 VHF transceiver -w/DSC
  • IS20 windspeed and direction
  • IS 20 combi system -- depth, knot/log
  • NX40 chartplotter at helm with radar overlay
  • Broadband radar

ACCOMMODATIONS

Throughout:   OIled teak joinery; Teak & holly sole ('10); 6'2" headroom; LED lighting - including brass reading lights.

  • Large double 6” 6” V-berth, forward with storage beneath  -w."leecloth" to secure gear; cushions and Sunbrella upholstery (replaced 2010)    
  • Port & Starboard 6’ 5” pull-out convertible settee/berths -  cushions and Sunbrella upholstery (replaced 2010); -w/ leecloths
  • Teak double drop-leaf table
  • Cedar-lined hanging locker, aft to port
  • Force-10 LPG cabin heater
  • Bookshelves outboard of settees
  • U-shaped galley to starboard
  • Two gimballed oil lamps
 ___________________________

Head -- Located to port near companionway; enclosed and spacious

  • Manual Headmate head – rebuilt in 2019; Simplified siphoning system engineered and installed during the Morris Yachts refit in 2010 to plumb head to a holding tank, thence from holding tank foredeck pump-out or directed by a single seacock overboard at sea.
  • S/S sink with hot and cold pressure water
  • Storage cabinets throughout
  • Wet-locker behind the head - drains to the bilge
  • Handheld shower; Shower pan plumbed to an electric Attwood sump pump

GALLEY
  • Hillerange 2-burner LPG stove; LPG control and monitors
  • 6 cu. ft. icebox -w/ automatic/electric Attwood pump to drain ice-melt overboard
  • SS sink -w/ hot and cold pressure water
  • Teak cabinetry -w/ ample storage
  • Laminate counter-tops

SAILS and RIGGING
Port Townsend Sails (PTS):

  • Full batten mainsail -w/ two reefs ('14)  --excellent
  • 105% high-clew furling Genoa ('14)  --excellent
  • Storm try’sl – ('17)  -- new/unused
  • Storm stay’sl - ('17)  -- new/unused
Acadia Sails (2011):

  • Hank-on staysail (2017 service by PTS) -- excellent  -
  • Roller furling high-cut Yankee jib ("spare headsail" - excellent condition).
  • Mainsail cover ('14)
  • Staysail and trysail deck bags ('19)
Rigging

  • Keel-stepped mast
  • Standing rigging replaced ('17)
  • Running rigging replaced ('10)
  • Tides marine track and mainsail slide system ('14)
  • C. Sherman Johnson quick-release lever for stays'l stay -w/ custom stowage for stay ('18)
  • Independent Schafer 8750 storm try’sl track on mast ('18) -w/ Yacht Fitters quick-loader slide stop for 19 mm Allslip mast slides on the try’sl.
  • Dedicated trys'l halyard. ('18)
  • Forespar LC10-18 EL-UTR whisker pole - stored on track on mast ('18)
Rig Dimensions:

           I         37.42’                     J         14.92’                               I²        30.88’
          J²        11.33’                     P        31.92’                               E        10.17”

          Foretriangle:  279 Ft²          Mast Rake:  4”


ELECTRONICS

Simrad electronics (2010):

  • RD68 VHF transceiver -w/DSC
  • IS20 analog apparent and true wind system; windspeed
  • IS 20 digital combi system (depth, knot/log)
  • NX40 Navigation station/ chart-plotter -w/ radar overlay (at helm); chart chip ('19)
  • Mast mounted broadband radar  (“instant-on;” low power consumption)
  • Note:  Wiring and antenna in place to add Vespermarine AIS


ELECTRICAL

  • "House" batteries:  Two AGM 12V batreries (105 amp-hr each -at 20 HR rate) AGM batteries ('15)
  • Optima Bluetop 34M 12V engine-start battery (750 CCA) ('15)
  • Two "master switches" ('15) - to isolate the starting battery from the house bank (or link batteries in emergency parallel)

ENGINE
  • Yanmar 2GMF diesel; 15 hp;  1170 hours
  • 3 blade MaxProp; PSS pripless shaftseal; S/S shaft
  • Starter motor (replaced '19)
  • Racor fuel filter
  • Speadseal raw water pump cover system
  • Raw water strainer ('10)
  • Engine instrument panel
  • Complete inventory of engine spares
  • Engine access: Aft of companionway ladder; Via port and starboard lazarettes (large removable access panels at inboard sides of lockers).

MISCELLANEOUS MECHANICAL

  • Two independent LPG tanks ('18) - in dedicated vented locker
  • Trident Marine propane control and detection system ('10)
  • Xintex M-2A propane monitor ('10)
  • Manual and electric bilge pumps

DECK and HULL EQUIPMENT and FEATURES
  • Full keel -w/ cutaway forefoot; Outboard rudder
  • Teak toerails, rubrails with S/S striker and teak trim
  • S/S bow and stern rails
  • Beige nonskid deck
  • Edson steering
  • Two propane bottles in cockpit vented locker – (new in 2018)
  • Two teak Dorade boxes with chrome ventilators
  • 6 cast-bronze opening ports with screens
  • Teak anchor platform with twin rollers
  • Bomar hatch forward of mast
  • Large signature Shannon foredeck hatch
  • 4 folding pad eyes outboard of seahood to secure stowed inflatable ('19)
  • Large port and starboard cockpit lockers (gelcoated inside)
  • Double lifelines and double gates & Dyneema jack lines ('18)
  • Cockpit teak table  
  • Cockpit awning zippers to dodger drop-down sunshades - dodger re-stitched ('19)
  • Monitor windvane - Delrin bushings, control and steering lines replaced ('19)
  • Hull barrier-coat ('10)

GROUND TACKLE
  • Lofrans’ Royal windlass ('15)
  • Shannon signature bow platform
  • 33# Spade anchor -w/ 5/16” G4 high tensile chain ('15);  50’ 3/4" 3-strand nylon rode ('15); Rode is spliced to chain and secured in the chain locker via a long pendant.
  • Rocna #10 22lb anchor ('18) -w/ chain; 300' of ½" 3-strand nylon rode

USCG GEAR and OTHER GEAR
  • Two fire extinguishers ('18)
  • USCC approved flares and signaling devices (expires 2021)
  • Lifesling
  • 4 throwable flotation cushions
  • 4 USCG adult universal Type-2 Life Jackets
  • Coastal medical kit
  • Fenders; docklines; boathook
  • Shannon galleyware
  • Set of Magma nesting pots
  • Weems and Plath Nav pouch

PERFORMANCE and STABILITY
  • SA/Displacement          16.47
  • Ballast Displacement    38.71%
  • Displacement/LWL        345
  • Capsize Screening       1.81

NOTABLE UPGRADES and REFIT --since 2011
2019

  • Engine starter motor replaced
  • Electrical panel installed -w/ circuit breaker panel, AIS conflict alarm, and silencing switch; fused dual USB DC charging port, and Balmar Smartgauge battery monitor
  • Manual Headmate head rebuilt with all new gaskets and joker valve.
  • Monitor windvane bushings and lines replaced
 2018

  • LPG tanks replaced
  • AIS Transponder added: WIFI capable Vespermarine XB-8000
  • Vespermarine antenna splitter installed
  • Silentwind wind generator charge controller replaced
  • Independent Schafer 8750 storm trysail track installed on mast with a Yacht Fitters quick-loader slide stop
  • Independent trysail halyard installed
  • Forespar LC10-18 EL-UTR whisker pole added
  • Whisker pole track installed on mast
  • Standing rigging replaced
 2017

  • LEDs installed throughout (except steaming light)
  • Staysail updated with piston hanks and reinforced by Port Townsend Sails
  • C. Sherman Johnson inner stay quick-release lever with custom stay storage arrangement when not in use
  • Storm trysail added – (Port Townsend Sails)
  • Hank-on storm staysail added - (Port Townsend Sails)
 2016

  • Harken staysail tracks and cars added to coach roof
  • 2 Lewmar rope clutches installed on coach roof
  • Lewmar two-speed, self-tailing winch on the coach roof - for staysail sheets
2015

  • Two "master switches" installed to isolate the starting battery from the house bank - or link batteries in emergency parallel
  • "House" batteries installed:  Two AGM 12V batreries (105 amp-hr each -at 20 HR rate) AGM batteries
  • Dedicated engine-start battery installed: Optima Bluetop 34M 12V (750 CCA)
  • Installed Silentwind 3-phase wind-generator -w/ charge controller
 2014

  • All water tanks cleaned, and tank inspection ports installed
  • Tides Marine Luff-track and mainsail slide system installed
  • Full batten mainsail with two reefs (Port Townsend Sails)
  • 105% high cut roller furling genoa (Port Townsend Sails)
  • Mainsail cover replaced
  • Retractable Dyneema lazyjacks installed (made by Brian Toss)
  • Schaefer System 1100 furling system installed - for headsail
2013

  • Two-speed, self-tailing main halyard winch on the mast
  • Portlight and hatch gaskets replaced
  • Toerail re-caulked
  • Chainplates inspected and re-bedded
2011

  • Working staysail added (Acadia Sails)
  • High-clew furling yankee added (Acadia Sails)

Listing Marketed by

Rod Rowan
Crusader Yacht Sales
7078 Bembe Beach RoadAnnapolis, Maryland, USA

More information or schedule a showing

Share With Your Friends

SHANNON 1983

Call Broker

Rod Rowan
Crusader Yacht Sales