YACHT DETAILS

VESSEL DETAILS

DEY

  • 37 m
  • 2016
  • N/A
  • Florida, United States
  • Price On Application

ABOUT DEY

Price shown base price

DETAILS & DIMENSIONS
  • Basic Information
  • Dimensions
  • Speed / Weight
  • Accomodations
  • Hull & Deck
  • Engine Information
  • Builder: N/A
  • Category: Mega Yacht
  • Model: Explorer
  • Model Year: 2016
  • YearBuilt: 2016
  • Year Refit: N/A
  • Refit Type: N/A
  • Tax Paid: N/A
  • Country: United States
  • Registration #: N/A
  • Coast Guard #: N/A
  • Vessel Top: N/A
  • Fly Bridge: No
  • Cockpit: No
  • Helipad: No
  • Accomodations: Guest SR/S: 4/0 - Crew R/B/S: 0/0/0
  • LOA: 121' 5" (37.00m)
  • LWL: --
  • LOD: --
  • Beam: --
  • Min Draft: --
  • Max Draft: --
  • Clearance: --
  • MFG Length: --
  • Cruise Speed: --
  • Cruise Speed RPM: --
  • Cruise Speed Range: --
  • Max Speed: --
  • Max Speed RPM: --
  • Max Speed Range: --
  • Displacement: --
  • Gross Tonnage: --
  • Water Capacity: --
  • Holding Tank: --
  • Fuel Capacity: --
  • Fuel Consumption: --
  • Berths: N/A
  • Heads: N/A
  • Sleeps: N/A
  • State Rooms: 4
  • Crew Berths: N/A
  • Crew Sleeps: N/A
  • Crew Heads: N/A
  • Captains Quarters: No
  • Hull ID: N/A
  • Hull Material: Steel
  • Deck Material: N/A
  • Hull Configuration: N/A
  • Project Manager: N/A
  • Hull Designer: N/A
  • Hull Color: N/A
  • Hull Finish: N/A
  • Exterior Designer: N/A
  • Interior Designer: N/A
  • Manufacturer: MAN
  • Model: N/A
  • Engine Count: Twin
  • Engine Type: Inboard
  • Fuel Type: Diesel

General Conditions

I.1.1 General

The Vessel shall be a custom-developed, deep-sea, full displacement, long-range steel hull with aluminium superstructure explorer yacht built to operate for private use and for public charter in the Mediterranean and Caribbean seas accordance with the design of Focus Yacht Design and the engineering of Brilliant Boats, Ltd., and in compliance with the rules and regulations published in the regulations of the Classification Society and with the Marine and Coastguard Agency Code of Practice.

The Vessel’s characteristics shall provide generous and luxurious accommodation spaces for the Owner’s party, with good recreational deck areas, while maintaining a good level of sea keeping.

With reference to the level of finish and workmanship, the standard to be observed shall be the standard applied in good European yacht building.

The crew’s accommodation and working areas shall give the crew good comfort and will enable them to operate the Vessel effectively without unnecessarily disturbing the Owner’s party.

The machinery concept is to achieve reliability by utilizing proven machinery and equipment from known manufacturers and utilizing industry standard modern materials and construction techniques to assure that future maintenance is obtainable in remote areas within reasonable levels.

This Specification is just an preliminary one and will change after final engineering.

I.1.4 Performance

Max speed at half load displacement: 14 knots

Range at economical cruising speed at half load displacement using two 4,000 miles engines and one generator:

I.2 REGISTRATION

a) All fees and taxes associated to the registration of the Vessel shall be paid by the Owner.

I.3 BUILDER

The construction shipyard for this project is:

  • Drettmann Yachts

Arberger Hafendamm 22, 28309 Bremen, Germany

and

Sunrise Yachting Yatcilik Sanayi ve Ticaret, Ltd.

Antalya Free Zone, Antalya, Turkey

referred to as the 'Builder'.

I.4 NAVAL ARCHITECTS & DESIGNERS

I.4.1 Naval Architecture

  • Sunrise Yachting

referred to as the 'Architect'.

I.4.2 Engineering & Classification Coordination

  • Özgün Yacht Design

referred to as the 'Engineer'.

I.4.3 Exterior and Interior Design & Styling

  • Focus Yacht Design & Drettmann Yachts

referred to as the 'Designer'.

I.5 CLASSIFICATION & CERTIFICATES

I.5.1 Classification

a) The vessel is to be built under the survey of and in full accordance with the Bureau Veritas Regulations for the Classification of Special Service Craft and including all Amendments and Notices issued up until the date of signing of the Vessel Construction Agreement.

b) The class notation shall be:

YACHT, MACH Charter Yacht, Motor, S – Unrestricted Navigation, UMS

I.5.2 MCA Certification

a) This vessel will comply with all of the requirements of LY2 - The Large Commercial Yacht Code Large for vessels 24 metres and over in load line length and the Code of Practice that applies to yachts which are in commercial use for sport or pleasure, do not carry cargo and do not carry more than 12 passengers.

I.5.3 Safety & Pollution Requirements

a) Construction will comply with all relevant COLREG and IMO regulations.

b) At completion, a MARPOL pollution and sewage certificate will be delivered.

 

I.5.4 Certificates

a) The following certificates shall also be enforced and/or supplied:

  • Builder’s Certificate;
  • Class Certificate (Temporary);
  • Certificate of MCA-Compliance;
  • Safety Radio Certificate;
  • Safety Equipment Certificate;
  • The 1966 International Convention on Load Lines;
  • An International Tonnage Certificate in the form required by Tonnage Convention ITC 69 and United Kingdom Regulations SI 841/1982.
  • International Convention for the Prevention of Collisions at Sea, 1972 and amendments.
  • International Convention for the Prevention of Pollution from Ships, 1973 and 1978 Protocol and all subsequent amendments (MARPOL).
  • International Convention for the Safety of Life at Sea, 1974 and 1978 Protocol and all subsequent Amendments (SOLAS) in as far as specifically mentioned in this Specification.
  • International Convention on Telecommunications and Radio Regulations, 1974 and all subsequent amendments.

I.5.5 Country of Registry Regulations (Owner’s charge)

a) The following rules shall also be considered, if required:

  • United States Coast Guard Pollution Regulations for Foreign Vessels.
  • Flag Registration regulations.

Hull & Deck Construction

 

II.1 GENERAL

II.1.1 Construction - General

a) The components shall be built in accordance with high standards for steel/aluminium ship construction.

b) All parts of the hull shall be accessible for survey and maintenance.

c) Workshop conditions shall be in accordance with the requirements of the Classification Society.

d) The Builder shall also maintain a detailed log of the entire building process.

e) Materials shall be stored under conditions suitable to the Classification Society.

Propulsion

III.1 MAIN ENGINES

III.1.1 Main Engines Particulars

a) There shall be fitted with two four-stroke diesel engines of the following model:

  • Make: MAN®
  • Type: D2842 LE 410
  • Rating: 2 x 809 kW (1,150 mhp) @ 2,100 rpm

III.1.2 Wheelhouse Instrument Panels

a) The wheelhouse room shall be equipped with electronic monitoring and control system.

III.2 GEARBOXES

a) The gearboxes are directly mounted to the engines.

Make: ZF MARINE®

  • Type: ZF 3000
  • Reduction: 4:1 (to be confirmed)

III.3 CONTROLS AND INSTRUMENTATION

III.3.1 Engine Controls

a) The engines and gearboxes shall be controlled by electronic controls

b) There will be four stations:

  • The main station in the wheelhouse;
  • Two wing stations: one on each side of the wheelhouse.
  • The station at the aft deck

III.4 GENERATORS

III.4.1 General

a) The main electric power is supplied by two diesel-driven, water-cooled generator sets.

b) A standby generator, located in the garage/garage shall provide emergency/auxiliary power.

c) For the electrical part of this system: see Chapter X, ‘Electrical System’.

d) The power of generators to be checked with the final electrical load analysis.

III.4.2 Generator Sets

a) All diesel generator sets shall be flexible mounted on a double set of hydraulic mounts.

b) All diesel engine driven generators to have hard-faced sound enclosures.

c) All generators to have a 24 V DC start system and an isolated ground.

d) Main Generator sets (2):

  • Make: KOHLER®, or equal
  • Type: 70-EFOZD
  • Rating : 87,5 kVA, 50 Hz, 400/230 VAC, 3-phase, 24 VDC starting.
  • Engine: 6-cylinder, 1500 rpm, heat exchanger-cooled.


Steering, Thrusters & Stabilizers

IV.1 STEERING

IV.1.1 Main Steering Gear

a) The rudders shall be actuated by means of a DATA HYD® or BCS® Class type-approved hydraulic steering system.

IV.2 BOWTHRUSTER & STERNTHRUSTER

IV.2.1 General

a) The bowthruster shall be hydraulic, running off the gearboxes’ P.T.O., with a control box in the ER compartment.

IV.2.2 Bowthruster & Sternthruster

a) The Builder shall install an hydraulic bow- and sternthruster, rated power 65 HP (50 kW) each, with joystick controls at all four control stations.

IV.3 STABILIZERS

IV.3.1 Stabilizers

a) The Builder shall install an electro-hydraulic gyro-controlled non-retractable zerospeed fin stabilizer system.

Systems

V.1 PUMPS

a) All pumps, where possible or otherwise specified, shall be from known suppliers

V.2 ANCHOR & MOORING SYSTEM

V.2.1 Anchor Windlasses

a) Two electrical vertical windlasses with 4,000 kg pull.

b) Gypsy kit for diameter 19 mm stud-link calibrated galvanised chain.

V.2.2 Anchors

a) 2 x 220 kg galvanised steel anchors “Pool-TW”-type high holding power, (size to be Class approved) shall be provided and installed.

V.2.3 Anchor Chains

a) 2 x 137.5 m 19 mm diameter calibrated galvanized U2 stud-linked chain, to be located in chain locker.

V.2.4 Chain Compressors

a) Two polished 316L stainless steel chain compressors to be mounted on base-plate on main deck.

V.2.5 Capstans

a) Two hydraulic vertical capstans of 1,000 kg pull each will be installed.

V.2.6 Mooring Equipment

a) Four mooring lines of 30 m each. 3 x 8 strand, 30 mm black square-braid Polyester.

b) Two mooring lines of 10 m each. 3 x 8 strand, 30 mm black square-braid Polyester with stainless thimble/eye splice and a 2 m loop of 14 mm galvanised chain.

c) One 100 m sea towing rope of diameter specified by Class.

 

V.2.7 Fenders

a) Ten fenders, approx. 1000 x 400 mm, each with lines and fender covers (10 total).

b) Two fender-boards, each with lines.

V.3 FUEL SYSTEM

V.3.1 Fuel Transfer System

a) Fuel can be transferred via the following pumps:

  • Electrical pump model ACM 501 BT by G&R®, capacity 6 m³ per hour;
  • Electrical pump G&R®, capacity 1 m3 per hour;
  • A centrifugal fuel separator, non self-cleaning.

b) An volume counter calibrated in litres with totalizer to be inserted in the discharge side of the fuel transfer system.

V.3.2 Fuel Separator

a) A centrifugal fuel separator ALFA-LAVAL®model MIB 303 or equal, 400 volt, 3 phase, 50 Hz. with a pump capacity of 760 l/h (3.35 GPM).

V.4 WASTEWATER SYSTEM

V.4.1 Toilet System

a) JETS® vacuum toilet system, with fresh water flushing and HAMANN® treatment plant.

b) The system shall be U.S. Coast Guard certified MSD type II.

V.4.2 Treatment Plant

a) Located in the engine room, a HAMANN® sewage treatment system will be installed in the engine room.

V.4.3 Toilets

a) 11 toilets, JETS® model, for all bathrooms.

b) 1 matching bidet for the bath in the Master Suite

V.5 HYDRAULIC SYSTEM

V.5.1 General

a) The main hydraulic system will be for:

  • The bow- and sternthruster
  • The stabilisers
  • The hydr. hatches
  • The garage tender beam crane
  • The transom and side door systems
  • The Jetski launching system

V.5.2 Main Hydraulic Power Pack

a) The main hydraulic system shall run all hydraulic equipment, including the stabilisers through a preferential valve.

b) The electro-hydraulic power-pack shall be driven by two 11 kW, 400 VAC, 3-phase, 50 Hz electric motors and a dedicated control box.

V.5.3 P.T.O. Pumps

 

a) The PTO hydraulic pumps shall principally run the bow- and sternthruster and the stabilisers under way.

V.6 CLIMATE CONTROL

V.6.1 Air Conditioning System

V.6.1.1 Compressor

a) The compressor units shall be WEBASTO/CLD®, or equal.

b) There shall be a four-compressor units sequence operating to provide tempered water for a chilled water line to the individual evaporators in each cabin.

c) The compressor units shall be Scroll-type 400 VAC, 3-phase, 50/60 Hz with a total cooling capacity of 240,000 BTU.

V.6.1.2 Fan Coils

a) Two fresh air makers shall insure the distribution all over the vessel of dry and precooled fresh air coming from outside the vessel.

b) The fan coils repartition shall be as follow (to be confirmed by the air conditioning supplier):

  • Sky lounge: (2)
  • Wheelhouse: (2)
  • Upper Deck pantry: (1)
  • Captain cabin: (1)
  • Main Deck salon: (2)
  • Main Deck pantry: (1)
  • Main Deck dining area: (2)
  • Owner’s quarters: (4) two in owner’s bedroom, one in bathroom; one in office
  • Guest quarters: (4) one for each guest cabin;
  • Crew quarters: (3) one for each cabin and one for the crew mess;
  • Laundry: (1)
  • ER Control Room: (1)

V.7 FRESHWATER SYSTEM

V.7.1 Hydrophore Pumps

a) There will be two G&R®, 400 VAC, 1 HP, water pressure pumps. A quiet operation will be assured.

b) One pressure accumulator tanks of about 100 l. (air chamber/diaphragm type), working/ test pressure 4/7 bar, will be mounted to keep the system pressurised.

V.7.2 Hot Water System

a) The system to be fitted with two 220 l., 7Kw duplex steel hot water boilers, connected in series.

V.7.3 Water makers

a) One HP® SC 180 water maker, with an total capacity of 4,320 litres per day, will be installed.

V.7.4 Consumer Water Treatment System

a) Prior to being distributed to the consumers, the water shall pass through a freshwater treatment system, suitable for a fresh water flow of 2 m3 per hour.

b) The system shall consist of:

  • A 5-micron cartridge filter that will remove all suspended solids in the water flow larger than 5 micron in size.
  • An activated carbon filter to adsorb a very wide range of unwanted tastes and odours in the water. It will in addition de-chlorinate the water.
  • An anti-scaling unit, to reduce to great extent the calcium scale build-up on water heaters, pipe work, shower nozzles etc.

V.8 BILGE / FIRE FIGHTING SYSTEM

V.8.1 Pumps

a) There will be three pumps installed in the vessel to run the bilge and fire system:

  • 1 Centrifugal pump in engine room: G&R®, 400 VAC, 4 kW
  • 1 Centrifugal pump in garage emergency room: G&R®, 400 VAC, 4 kW

V.8.2 Water-Mist Fire Extinguishing System

a) An automatic water mist extinguishing system with pressure pump and copper piping NOVENCO® XFLOW, or equal, shall be installed throughout the accommodation of the vessel.

V.9 PNEUMATIC SYSTEMS

V.9.1 Low-Pressure Air System

a) One air compressors shall be installed in the engine room, pressure oil lubricated, air cooled. The working pressure is to be set at 10 bar to cut-in/out at (+-)5%

V.9.2 High-Pressure Air System

a) The vessel will be fitted with an 400 VAC, 3-phase, 50-60 Hz, electrically-driven BAUER® dive compressor.

V.10 LUBE OIL SYSTEM

V.10.1 Oil Transfer Pumps

a) Oil change system for both main engines and generators with two reversible pumps such as an G&R® or equal 1/2 HP, 230 VAC and manifold and all necessary plumbing.

V.11 DOMESTIC APPLIANCE SYSTEMS

V.11.1 Crew Galley Appliances

a) One under-counter fridge.

b) One microwave oven.

c) Simple coffee maker

d) Proper secure stowage provisions shall be provided for all equipment items not permanently installed.

V.11.2 Main Galley Appliances

e) One LIEBHERR® stainless-steel refrigerator/freezers, stand-alone type.

f) One four-burner GAGGENAU® electric induction cooking range.

g) One custom stainless steel exhaust canopy with fire extinguishing system.

h) One GAGGENAU® or similar cooking oven.

i) One GAGGENAU® or similar microwave oven.

j) One MIELE® or similar professional dishwasher.

V.11.3 Upper Deck Pantry Appliances

a) One GAGGENAU® or similar microwave oven.

b) One FOSTER® or similar ice cube maker.

c) One LIEBHERR® or similar fridge.

d) One LIEBHERR® or similar under-counter wine refrigerator with optional glass door.

V.11.4 Owner’s Appliances

a) One ULINE® or similar fridge in owner’s cabin.

V.11.5 Sun Deck Appliances

a) One FOSTER® or similar icemaker.

b) One LIEBHERR® or similar under-counter fridge.

c) One Double Grill BBQ, JENN AIR® or similar.

V.11.6 Beach Club Appliances

d) One FOSTER® or similar icemaker.

e) One LIEBHERR® or similar under-counter fridge.

V.11.7 Pilothouse Appliances

a) One ULINE® or similar fridge in the pilot house

V.11.8 Laundry Room Appliances

a) One MIELE® or similar commercial washing machines;

b) One MIELE® or similar commercial dryers;

V.12 COLD ROOMS

V.12.1 General

There will a large fridge/freezer stainless steel finish cold room arrangement in the crew deck.

Electrical System

 

V.1 PUMPS

a) All pumps, where possible or otherwise specified, shall be from known suppliers

V.2 ANCHOR & MOORING SYSTEM

V.2.1 Anchor Windlasses

a) Two electrical vertical windlasses with 4,000 kg pull.

b) Gypsy kit for diameter 19 mm stud-link calibrated galvanised chain.

V.2.2 Anchors

a) 2 x 220 kg galvanised steel anchors “Pool-TW”-type high holding power, (size to be Class approved) shall be provided and installed.

V.2.3 Anchor Chains

a) 2 x 137.5 m 19 mm diameter calibrated galvanized U2 stud-linked chain, to be located in chain locker.

V.2.4 Chain Compressors

a) Two polished 316L stainless steel chain compressors to be mounted on base-plate on main deck.

V.2.5 Capstans

a) Two hydraulic vertical capstans of 1,000 kg pull each will be installed.

V.2.6 Mooring Equipment

a) Four mooring lines of 30 m each. 3 x 8 strand, 30 mm black square-braid Polyester.

b) Two mooring lines of 10 m each. 3 x 8 strand, 30 mm black square-braid Polyester with stainless thimble/eye splice and a 2 m loop of 14 mm galvanised chain.

 

c) One 100 m sea towing rope of diameter specified by Class.

 

V.2.7 Fenders

a) Ten fenders, approx. 1000 x 400 mm, each with lines and fender covers (10 total).

b) Two fender-boards, each with lines.

V.3 FUEL SYSTEM

V.3.1 Fuel Transfer System

a) Fuel can be transferred via the following pumps:

  • Electrical pump model ACM 501 BT by G&R®, capacity 6 m³ per hour;
  • Electrical pump G&R®, capacity 1 m3 per hour;
  • A centrifugal fuel separator, non self-cleaning.

b) An volume counter calibrated in litres with totalizer to be inserted in the discharge side of the fuel transfer system.

V.3.2 Fuel Separator

a) A centrifugal fuel separator ALFA-LAVAL®model MIB 303 or equal, 400 volt, 3 phase, 50 Hz. with a pump capacity of 760 l/h (3.35 GPM).

V.4 WASTEWATER SYSTEM

V.4.1 Toilet System

a) JETS® vacuum toilet system, with fresh water flushing and HAMANN® treatment plant.

b) The system shall be U.S. Coast Guard certified MSD type II.

V.4.2 Treatment Plant

a) Located in the engine room, a HAMANN® sewage treatment system will be installed in the engine room.

V.4.3 Toilets

a) 11 toilets, JETS® model, for all bathrooms.

b) 1 matching bidet for the bath in the Master Suite

V.5 HYDRAULIC SYSTEM

V.5.1 General

a) The main hydraulic system will be for:

  • The bow- and sternthruster
  • The stabilisers
  • The hydr. hatches
  • The garage tender beam crane
  • The transom and side door systems
  • The Jetski launching system

V.5.2 Main Hydraulic Power Pack

a) The main hydraulic system shall run all hydraulic equipment, including the stabilisers through a preferential valve.

b) The electro-hydraulic power-pack shall be driven by two 11 kW, 400 VAC, 3-phase, 50 Hz electric motors and a dedicated control box.

 

V.5.3 P.T.O. Pumps

 

a) The PTO hydraulic pumps shall principally run the bow- and sternthruster and the stabilisers under way.

V.6 CLIMATE CONTROL

V.6.1 Air Conditioning System

V.6.1.1 Compressor

a) The compressor units shall be WEBASTO/CLD®, or equal.

b) There shall be a four-compressor units sequence operating to provide tempered water for a chilled water line to the individual evaporators in each cabin.

c) The compressor units shall be Scroll-type 400 VAC, 3-phase, 50/60 Hz with a total cooling capacity of 240,000 BTU.

V.6.1.2 Fan Coils

a) Two fresh air makers shall insure the distribution all over the vessel of dry and precooled fresh air coming from outside the vessel.

b) The fan coils repartition shall be as follow (to be confirmed by the air conditioning supplier):

  • Sky lounge: (2)
  • Wheelhouse: (2)
  • Upper Deck pantry: (1)
  • Captain cabin: (1)
  • Main Deck salon: (2)
  • Main Deck pantry: (1)
  • Main Deck dining area: (2)
  • Owner’s quarters: (4) two in owner’s bedroom, one in bathroom; one in office
  • Guest quarters: (4) one for each guest cabin;
  • Crew quarters: (3) one for each cabin and one for the crew mess;
  • Laundry: (1)
  • ER Control Room: (1)

V.7 FRESHWATER SYSTEM

V.7.1 Hydrophore Pumps

a) There will be two G&R®, 400 VAC, 1 HP, water pressure pumps. A quiet operation will be assured.

b) One pressure accumulator tanks of about 100 l. (air chamber/diaphragm type), working/ test pressure 4/7 bar, will be mounted to keep the system pressurised.

V.7.2 Hot Water System

a) The system to be fitted with two 220 l., 7Kw duplex steel hot water boilers, connected in series.

V.7.3 Water makers

a) One HP® SC 180 water maker, with an total capacity of 4,320 litres per day, will be installed.

V.7.4 Consumer Water Treatment System

a) Prior to being distributed to the consumers, the water shall pass through a freshwater treatment system, suitable for a fresh water flow of 2 m3 per hour.

b) The system shall consist of:

  • A 5-micron cartridge filter that will remove all suspended solids in the water flow larger than 5 micron in size.
  • An activated carbon filter to adsorb a very wide range of unwanted tastes and odours in the water. It will in addition de-chlorinate the water.
  • An anti-scaling unit, to reduce to great extent the calcium scale build-up on water heaters, pipe work, shower nozzles etc.

V.8 BILGE / FIRE FIGHTING SYSTEM

V.8.1 Pumps

a) There will be three pumps installed in the vessel to run the bilge and fire system:

  • 1 Centrifugal pump in engine room: G&R®, 400 VAC, 4 kW
  • 1 Centrifugal pump in garage emergency room: G&R®, 400 VAC, 4 kW

V.8.2 Water-Mist Fire Extinguishing System

a) An automatic water mist extinguishing system with pressure pump and copper piping NOVENCO® XFLOW, or equal, shall be installed throughout the accommodation of the vessel.

V.9 PNEUMATIC SYSTEMS

V.9.1 Low-Pressure Air System

a) One air compressors shall be installed in the engine room, pressure oil lubricated, air cooled. The working pressure is to be set at 10 bar to cut-in/out at (+-)5%

V.9.2 High-Pressure Air System

a) The vessel will be fitted with an 400 VAC, 3-phase, 50-60 Hz, electrically-driven BAUER® dive compressor.

V.10 LUBE OIL SYSTEM

V.10.1 Oil Transfer Pumps

a) Oil change system for both main engines and generators with two reversible pumps such as an G&R® or equal 1/2 HP, 230 VAC and manifold and all necessary plumbing.

V.11 DOMESTIC APPLIANCE SYSTEMS

V.11.1 Crew Galley Appliances

a) One under-counter fridge.

b) One microwave oven.

c) Simple coffee maker

d) Proper secure stowage provisions shall be provided for all equipment items not permanently installed.

V.11.2 Main Galley Appliances

e) One LIEBHERR® stainless-steel refrigerator/freezers, stand-alone type.

f) One four-burner GAGGENAU® electric induction cooking range.

g) One custom stainless steel exhaust canopy with fire extinguishing system.

h) One GAGGENAU® or similar cooking oven.

i) One GAGGENAU® or similar microwave oven.

j) One MIELE® or similar professional dishwasher.

V.11.3 Upper Deck Pantry Appliances

a) One GAGGENAU® or similar microwave oven.

b) One FOSTER® or similar ice cube maker.

c) One LIEBHERR® or similar fridge.

d) One LIEBHERR® or similar under-counter wine refrigerator with optional glass door.

V.11.4 Owner’s Appliances

a) One ULINE® or similar fridge in owner’s cabin.

V.11.5 Sun Deck Appliances

a) One FOSTER® or similar icemaker.

b) One LIEBHERR® or similar under-counter fridge.

c) One Double Grill BBQ, JENN AIR® or similar.

V.11.6 Beach Club Appliances

d) One FOSTER® or similar icemaker.

e) One LIEBHERR® or similar under-counter fridge.

V.11.7 Pilothouse Appliances

a) One ULINE® or similar fridge in the pilot house

V.11.8 Laundry Room Appliances

a) One MIELE® or similar commercial washing machines;

b) One MIELE® or similar commercial dryers;

V.12 COLD ROOMS

V.12.1 General

There will a large fridge/freezer stainless steel finish cold room arrangement in the crew deck.

Electronics

 

VII.1 COMMUNICATION

VII.1.1 SSB Transceiver

a) One SAILOR® MF/HF 5000 SSB, 150W, GMDSS approved, automatic antenna tuning unit fitted with automatic and manual grounding system.

VII.1.2 VHF Transceiver

a) Two SAILOR® VHF RT 5022 with DSC Class A, one remote in the crew mess and the other at the chart table, Wheelmark approved.

VII.1.3 Cellular Phones

a) Two ERICSSON®, or equal GSM base station phones with their own 24VDC/12VDC power reducer. They will be connected to the vessel’s PABX system.

VII.1.4 Handheld VHF

a) Three SIMRAD®, Axis 50, handheld GMDSS VHF waterproof made and fitted with a multi desk quick charger.

VII.1.5 Fleet Broadband Station

a) One SAILOR® 250 Inmarsat Fleet Broadband station with a dedicated fax , a emergency push button, connected to a GPS NMEA output, providing a connection to the telephone distribution and allowing data transmission.

VII.1.6 SAT TV – Internet

One SEATEL® 2004 TV-at-Sea satellite receiver with European LNB.

VII.1.7 Inmarsat-C Station

a) One SAILOR® TT-3000EB Mini-C with GPS-option GMDSS Inmarsat C station with H- 1252 dedicated printer.

VII.1.8 SSAS

a) One SAILOR® SSAS add-on kit with Alert & Test buttons.

VII.1.9 Safety Transponders

See Chapter: XII.1.3 EPIRB & SART

VII.1.10 Telephone Distribution

a) One PANASONIC® or LG® PABX connected to the Fleet Broadband, the VSAT, cell phone units and shore connection when available.

VII.2 NAVIGATION ELECTRONICS

VII.2.1 Differential GPS

a) One SIMRAD® MX500 DGPS receiver with differential facilities connected to the NMEA interface.

VII.2.2 Navtex

a) One ICS® NAV-7 Navtex receiver with active antenna.

VII.2.3 AIS Transceiver

a) One SIMRAD® AI80 AIS station transceiver connected to the NMEA interface.

VII.2.4 Navigation Computer/Plotter

a) SIMRAD® GB40 Glass Bridge navigation system to be as follow:

  • One computer unit,
  • Three HATTELAND® JH19T12 17” LCD displays,
  • One Speed Transducer for Motor Yacht set,
  • One EB60 Echosounder module,
  • One NAVICO® IS20 Wind direction and speed sensor pack,
  • One digital repeater at Captain’s Cabin,
  • One digital repeater crew’s Mess.

VII.2.5 Navigation Instruments

  • One Compass CASSENS & PLATH®, T12/C reflector reading device,
  • One Inclinometer sensor.

VII.2.6 Echo sounder

a) One echo sounder SIMRAD® EB60 interface.

VII.2.7 Radars

a) One SIMRAD® TX12K Radar, 12 kW, 72 Nm fitted with 6ft. scanner unit shall be connected to the gyro compass and GPS Nmea output via chart plotter GB40.

VII.2.8 Loch/Speedo

a) Included in Navigation Computer.

VII.2.9 Autopilots

a) One SIMRAD® AP50 IMO/Wheelmark automatic pilot connected to the gyro compass and NMEA interface.

b) A NMEA switch by software or hardware shall be provided for using either GPS NMEA output or marine navigation software NMEA output.

c) The output signal will drive the main steering system.

VII.2.10 Gyrocompass

a) Regular SIMRAD® GC80 gyrocompass with sin/cos, Cif and step by step interfaces.

b) A rudder feedback unit and a remote control display shall be provided.

VII.2.11 Navigation Software

a) One SIMRAD® GB40 navigation software with NMEA and radar overlay interfaces.

VII.2.12 Rudder Angle

a) An IMO-approved SIMRAD® AR78 independent steering repeater system shall be installed on the main rudder tiller.

b) Indicators at each steering station.

VII.2.13 Antennae Requirements

a) Antenna layout arrangement to be defined as per supplier’s specifications.

VII.3 NAVIGATION, NON ELECTRONIC

a) One (1) RIEKER® Instrument RIE-2055 inclinometer.

b) One CASSENS & PLATH® or equal magnetic compass to be fitted in navigation area according to Classification Society rules.

VII.4 ENTERTAINMENT

VII.4.1 Central Rack & A/V Server

  • 2 x ZOLMEDIA® High-end Media server - 2.5 TB each
  • 1 x Rack-mounted monitor and keyboard for server work and media additions
  • 2 x UPS Power backups
  • 2 x 16 Port Giga switches 1 x Giga Router – CISCO®

VII.4.2 Crew Quarters

  • The crew will have the ability to watch Satellite TV, CCTV, Movies and Music on demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • 32” LCD TV, Sony, Samsung or equal
  • 19” LCD screen for CCTV
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x LOGITEC® Harmony ONE (IR) Multi-remote - Configured
  • 1 x TEAC® Amplifier
  • 4 x SONANCE® CR101 ceiling speakers
  • 1 x iPOD/mp3 player docking station in crew mess
  • 1 x iPod/mp3 player pre-amplified docking station with two SONANCE® ceiling speakers in each crew cabin

VII.4.3 Captain’s Cabin

  • The captain will have the ability to watch Satellite TV, CCTV, Movies and Music on demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • 32” LCD TV, Sony, Samsung or equal
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x LOGITEC® Harmony ONE (IR) Multi-remote - Configured
  • 1 x TEAC® Amplifier
  • 4 x SONANCE® CR101 ceiling speakers
  • 1 x iPOD/mp3 player docking station

VII.4.4 Owner’s Accommodation

  • Owner will have the ability to watch Satellite TV, CCTV, Movies and Music on demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • 1 x 50” LCD TV, Sony, Samsung or equal.
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x LOGITEC® Harmony 1000 (RF) Multi-remote - Configured
  • 1 x YAMAHA® 5.1 A/V Receiver
  • 1 x MISSION® m3AS Sub-woofer
  • 5 x SONANCE® CR101 ceiling speakers
  • 1 x iPOD/mp3 player docking station

VII.4.5 Guest’s Accommodation

  • Guests will have the ability to watch Satellite TV, Movies and Music on demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • 1 x 32” LCD TV, Sony, Samsung or equal.
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x LOGITEC® Harmony 1000 (IR) Multi-remote - Configured
  • 1 x TEAC® Amplifier
  • 5 x SONANCE® CR101 ceiling speakers
  • 1 x iPOD/mp3 player docking station

VII.4.6 Main Deck Salon

  • Owner and guests will have the ability to watch Satellite TV, CCTV, Movies and Musicon demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • Ability to play the same or different music as inside or the different decks.
  • 1 x 50” LCD TV, Sony, Samsung or equal.
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x Audio stream player with colour remote – showing albums and tracks for aft deck
  • 1 x LOGITEC® Harmony 1000 (RF) Multi-remote - Configured
  • 1 x YAMAHA® 5.1 A/V Receiver
  • 1 x MISSION® m3AS Sub-woofer
  • 5 x SONANCE® C101 ceiling speakers
  • 1 x iPOD/mp3 player docking station

VII.4.7 Aft Main Deck

  • Owner and guests will have the ability to listen to all music on the server, controlling volume and track, album or playlist. Selection of music is easy and stress free, choose the album by cover then select the required music.
  • 1 x Audio stream player with colour remote
  • 1 x TEAC® small amplifier (will be set at constant 75% and controlled by stream player)
  • 4 x SONANCE® exterior speakers - white

VII.4.8 Upper Deck Salon

  • Owner and guests will have the ability to watch Satellite TV, CCTV, Movies and Music on demand from the central server using the TV, controlled by one colour screen remote or listen to personal iPOD/MP3 player from a docking station.
  • Ability to play the same or different music as inside or the different decks.
  • 1 x 50” LCD TV, Sony, Samsung or equal.
  • 1 x Satellite TV Box (mounted in central A/V rack)
  • 1 x Video Streamer (mounted in central A/V rack)
  • 1 x Audio stream player with colour remote – showing albums and tracks for aft deck
  • 1 x LOGITEC® Harmony 1000 (RF) Multi-remote - Configured
  • 1 x YAMAHA® 5.1 A/V Receiver
  • 1 x MISSION® m3AS Sub-woofer
  • 5 x SONANCE® C101 ceiling speakers for salon
  • 2 x SONANCE® CR101 ceiling speakers for dining area
  • 1 x iPOD/mp3 player docking station

VII.4.9 Aft Upper Deck

Owner and guests will have the ability to listen to all music on the server, controlling volume and track, album or playlist. Selection of music is easy and stress free, choose the album by cover then select the required music.

  • 1 x Audio stream player with colour remote
  • 1 x TEAC® small amplifier (will be set at constant 75% and controlled by stream player)
  • 4 x SONANCE® exterior speakers - white

VII.4.10 Sun Deck

  • The ability to listen to all music from the server, controlling volume and track, album or playlist. Selection of music is easy and stress free, choose the album by cover then select the required music.
  • 1 x Audio stream player with colour remote – showing albums and tracks for sun deck
  • 1 x LOGITEC® Harmony 1000 (RF) Multi-remote - Configured
  • 1 x YAMAHA® 5.1 A/V Receiver
  • 1 x MISSION® m3AS Sub-woofer
  • 5 x SONANCE® exterior speakers – white
  • 2 x SONANCE® exterior speakers – white – forward seating area
  • 1 x iPOD/mp3 player docking station

VII.4.11 Bridge and Foredeck Area

  • You will have the ability to listen to all music on the server, controlling volume and track, album or playlist. Selection of music is easy and stress free, choose the album by cover. One remote covers both the bridge and forward area.
  • 1 x Audio player with colour remote
  • 1 x TEAC® amplifier (will be set at constant 75% and controlled of stream player)
  • 1 x Speaker selection switch – for bridge or foredeck or both
  • 2 x SONANCE® exterior speakers – white (Bridge forward area)
  • 2 x SONANCE® CR101 white ceiling speakers (Bridge)

VII.4.12 CCTV

  • You will have the ability to watch max 8 cameras (6 in standard) showing different area’s of the yacht, whilst constantly recording; cycle time of 7 days recording.
  • 6 x Exterior cameras
  • 1 x CCTV duplexer and recorder – Built in Hard drive – 8 Channel – giving spare

VII.4.13 Computer Network

  • Yacht wide access to the network and central storage Hub. A 1Terrabyte Network storage device to allow files to be saved and accessed from any computer you give the authority. Printing available from any computer on the network, both wirelessly or wired. Access is not limited to the internals of the yacht but also all outdoor areas by the use of the external access point.
  • 1 x External access point
  • 3 x Internal access points
  • 1 x NAS 1TB network storage Hub

 

VII.4.14 Shore Connection

 

a) The following shore connections to be provided:

  • Telephone (to vessel’s PABX);
  • Ethernet/LAN.

Exterior Outfitting

VIII.1 WOOD JOINERY EXTERIOR

VIII.1.1 Teak Decks

a) Teak deck planking 12mm x 50mm finished dimensions, glued to deck with SIKAFLEX® or equal.

VIII.2 DECK EQUIPMENT

VIII.2.1 Windscreen Wipers

a) Three GALLINEA® or equal windscreen wipers, two-speed, 24 VDC with 40” wiper blades shall be fitted to the forward windows of the wheelhouse.

VIII.2.2 Riviera Gangway

a) A 5 m long electro-hydraulic gangway (minimum width 700 mm), in the same style as the accommodation ladder, exiting through a flush door in the transom.

VIII.2.3 Boarding Ladder

a) A MARQUIPT® or equal EZ Stair boarding ladder shall be provided.

VIII.2.4 Swimming ladder

a) The swimming ladder shall extend approximately one meter down into the water and have comfortable 600 mm wide teak steps.

VIII.2.5 Flag Pole

a) On centreline, a 316 L stainless steel flag pole 3 m-long of sufficient diameter in a support integral with the aft side of the bridge deck bulwark.

VIII.3 TENDER & JETSKI GARAGE

VIII.3.1 General

a) The tender garage at the bow will accommodate one tender

b) The jetski garage at the stern next to the beach club will accommodate one jetski

VIII.4 INVENTORY

VIII.4.1 Deck Equipment

a) The Builder shall include provisions for storage, hoisting or deployment of the following

Owner Supplied Items:

  • Dinghy anchor,
  • 2 Boat hooks,
  • 2 x 12m hose,
  • A handheld 24 VDC searchlight shall be located in a dedicated locker in the foredeck with a waterproof socket.

Coatings & Coverings

 

X.1 PAINT SYSTEM

X.1.1 General

a) The entire painting system shall be HEMPEL® PRO SYSTEM, or equal.

Safety Equipment

 

XI.1 GENERAL

XI.1.1 Life Rafts & Equipment

a) Four (4) SWITLIK®, DPS®, VIKING® or equal life rafts to be supplied by the Builder as per Class and SOLAS regulations for a vessel of this size.

b) Four ring buoys stored in recesses with vessel identification as required by SOLAS.

XI.1.2 EPIRB & SART (Owner’s Supply)

a) One SIMRAD® EG50 Type I EPIRB with hydrostatic release and deck mount casing;

b) One SIMRAD® EG50 Type II EPIRB, bracket-mounted in the wheelhouse;

c) One SIMRAD® SA50 Search and Rescue Transponder.

XI.1.3 Flares

a) The following equipment is to be supplied with the Vessel in accordance with governing authorities:

 

  • Twelve red parachute flares
  • Six white parachute flares
  • Four red hand flares
  • Four white hand flares
  • Three orange smoke day signals.

XI.1.4 Fog Horn

a) One chrome plated KAHLENBERG marine air horn system, D2 model with M511A fog signal timer, according to Classification Society and Flag Registry rules.

XI.1.5 Searchlights

a) Two ACR® or SANSHIN® Xenon searchlights, model RCL 100 mounted on the mast with remote control at the helm in wheelhouse.

XI.1.6 First Aid Kit

a) A first aid kit, suitable for a world-wide cruising motor yacht of this size, according to SOLAS and Lloyd's is to be supplied.

XI.1.7 Life Vests and Harnesses

a) 24 life vests, with radar and light reflectors, will be supplied with the vessel in accordance with SOLAS, Class and U.S Coast-guards regulations.

b) A whistle and stroboscopic light will be delivered for each life vest.

XI.1.8 Fire Alarm System

a) A general fire alarm system fully in accordance with the statutory- and class and requirements shall be installed.

b) The system shall incorporate:

  • Smoke sensors in all accommodation spaces.
  • Manual alarm triggers at strategic locations.
  • Heat sensors in the galley and engine room.
  • Audible alarm bell.
  • Alarm indicating panel in the wheelhouse.

XI.1.9 Accommodation Fire Prevention

a) A NOVENCO® XFlow™ or equal automatic water mist extinguishing system shall be installed on the vessel.

XI.1.10 Fire hoses

a) Five fire hoses shall be housed in deck lockers in the direct vicinity of the STORZ® valves, connected to the fire main:

  • One in the engine room.
  • One at the foredeck
  • Two on main deck level.
  • One on the bridge deck.

Each hose shall be fitted with a dual purpose nozzle and shall be stored in a non-corrosive rack.

XI.1.11 Misc. Fire fighting Items

  • One fire suit with breathing apparatus, one fire axe and one fire blanket to be stored in the CO2 locker.
  • Fire blankets in the galley, crew lounge, pantry, engine room.
}

FIND YOUR NEXT YACHT, LISTINGS UPDATED DAILY

ADVANCED SEARCH